|
|
|
|
|
|
|
|
|
PHONE ORDERS ARE NOW AVAILABLE WITH MOST CREDIT CARDS. |
|
WHEN ORDERING BY PHONE PLEASE HAVE YOUR CARD HANDY |
|
AND THE ITEM PART # LOCATED IN UPPER LEFT CORNER OF EACH ITEM IN BLUE |
|
NO SPRING COMPRESSOR OR SPECIAL TOOL REQUIRED |
|
|
|
CLICK ON BUY NOW BUTTON UNDER PICTURE TO PURCHASE |
|
|
|
PART # FJ2 2007 TOYOTA FJ CRUISER AND 2003 THRU 2007 4 RUNNER LEVEL LIFT FRONT STRUT SPACERS NO SPRING COMPRESSOR OR SPECIAL TOOLS REQUIRED The Spacers are C.N.C. Machined from aircraft quality T-6 aluminum. The kit contains the following (2) Strut spacers. (6) Mounting studs. (6) Flat washers (6) Self locking flange nuts. Complete step by step installation instructions with pictures. And our Tech Support Ph # is posted on the home page if you have a question. It takes about 1 1/2 hours to install both sides. As with any lift a front end alignment is required after installation. |
|
| PART
# FJ25
2007 TOYOTA FJ CRUISER AND 2003 THRU 2007 4 RUNNER 2 1/2" FRONT LIFT STRUT SPACERS NO SPRING COMPRESSOR OR SPECIAL TOOLS REQUIRED The Spacers are C.N.C. Machined from aircraft quality T-6 aluminum. The kit contains the following (2) Strut spacers. (6) Mounting studs. (6) Flat washers (6) Self locking flange nuts. Complete step by step installation instructions with pictures And our Tech Support Ph # is posted on the home page if you have a question. It takes about 1 1/2 hours to install both sides. As with any lift a front end alignment is required after installation. |
![]() |
|
PART # FJ3 2007 TOYOTA FJ CRUISER AND 2003 THRU 2007 4 RUNNER 3" FRONT LIFT STRUT SPACERS NO SPRING COMPRESSOR OR SPECIAL TOOLS REQUIRED The Spacers are C.N.C. Machined from aircraft quality T-6 aluminum. The kit contains the following (2) Strut spacers. (6) Mounting studs. (6) Flat washers (6) Self locking flange nuts. Complete step by step installation instructions with pictures And our Tech Support Ph # is posted on the home page if you have a question. It takes about 1 1/2 hours to install both sides. As with any lift a front end alignment is required after installation. |
|
| PART
# FJ3D
2007 TOYOTA FJ CRUISER 4X4 AND 2003 THRU 2007 4 RUNNER 4X4 3" FRONT LIFT STRUT SPACER KIT WITH FRONT DIFFERENTIAL DROP KIT INCLUDED NO SPRING COMPRESSOR OR SPECIAL TOOLS REQUIRED The Spacers are C.N.C. Machined from aircraft quality T-6 aluminum. The kit contains the following (2) Strut spacers. (6) Mounting studs. (6) Flat washers (6) Self locking flange nuts. (2) 1" Front Differential drop spacers and all required hardware. Complete step by step installation instructions with pictures. And a Tech Support Ph. # you can call if you feel you need help. It takes about 1 1/2 hours to install both strut spacers and about 30 minutes to install the drop kit. As with any lift a front end alignment is required after installation. |
![]() |
|
PART # FJ3S 2007 FJ CRUISER 4X4 OR 2 W/D AND 2003 THRU 2007 4 RUNNER COMPLETE 3" SUSPENSION LIFT KIT WITH REAR COIL SPRINGS NO SPRING COMPRESSOR OR SPECIAL TOOLS REQUIRED The Spacers are C.N.C. Machined from aircraft quality T-6 aluminum.
(2) Strut spacers. (6) Mounting studs. (6) Flat washers (6) Self locking flange nuts. (2) Rear coil springs Complete step by step installation instructions with pictures. And our Tech Support Ph # is posted on the home page if you have a question. As with any lift a front end alignment is required after installation. NOTE: Wheel width and backset will play a major part in the fitment of any tire/wheel combination. With this lift you should be able to run 285x70Rx17 = 32.7x11.2x17 on stock wheels with no problem, Or on after market wheels you may be able to run up to a 305x70Rx17 = 33.8x12x17 But we highly recommend you test fit the tire/wheels on the truck before you buy them. |
|
|
PART # FJ3SD
(2) Strut spacers. (6) Mounting studs. (6) Flat washers (6) Self locking flange nuts. (2) Rear coil springs (2) 1" Front Differential drop spacers and all required hardware. Complete step by step installation instructions with pictures. And our Tech Support Ph # is posted on the home page if you have a question. As with any lift a front end alignment is required after installation. NOTE: Wheel width and backset will play a major part in the fitment of any tire/wheel combination. With this lift you should be able to run 285x70Rx17 = 32.7x11.2x17 on stock wheels with no problem, Or on after market wheels you may be able to run up to a 305x70Rx17 = 33.8x12x17 But we highly recommend you test fit the tire/wheels on the truck before you buy them. |
![]() |
| PART
# FJ07 D1
2007 FJ CRUISER 4X4 FRONT DIFFERENTIAL DROP DOWN SPACER KIT The spacers lower the front differential 1 in. and reduces the angle of the front axel which was increased due to a lift, The spacers are recommended for any lift over 2 inches. The drop down spacers help to reduce possible long term CV Boot and axel wear. As with all of our products the spacers are very easy to install, They take about 30 minutes with basic hand tools. They come complete with all required hardware and Instructions. If this is purchased at the same time with any other item on this page, We will refund the shipping cost for this item as soon as your order is shipped. |
![]() |
RETURN POLICY
We have a 15 day return policy for all returned
items that have not been installed or damaged in anyway.
The buyer is responsible for all return shipping cost and any refund will be
minus all shipping cost
and a possible 25% restocking fee.
Disclaimer & Limitation of Liability
All lifts raise the center of gravity making the truck less
stable in turns and off road.
This condition increases the chance of roll over and injury or possibly death.
In the purchase of our products you agree not to hold seller responsible for any
damages or injuries resulting
from the improper installation or use of our products.
All content and pictures are
copyright © extremetrucktoys.com
Do not copy with out written permission